Hacking ISP for free internet or Bypass ISP Login Page!

Hello dudes,

In this particular post, I m gonna share with you an awesome trick to bypass your ISP login page and gain internet access for free. This trick is work on all WAN networks except Dial-up networks. Networks which uses a username and password to connect are known as PPPoE will not work with this trick because every client uses a different username and password. But it will work on Static IP and DHCP networks!

I have written an updated article on this topic which you should read if you want to see everything in action and step-by-step.

For Dial-Up users-
Try this post: GETTING UNLIMITED FREE INTERNET ON DIAL-UP NETWORKS!

Required Software:

Netcut: This is a software which finds IPs and MAC or Physical addresses of the connected clients in your network. There are hundreds of users and sometimes thousands in a particular ISP. This software has a user-friendly interface which is quite easy for beginners.

Steps for Getting Free Internet!

1. Download Netcut
2. Install Netcut and run it.
3. Now, you have to allow perhaps 10 seconds for the software to scan the connected clients and show their information.
4. Now, as mention earlier that it will only work on DHCP and Static IP networks. You have to choose any one client and copy down it’s MAC Address and IP address in Notepad.
5. Now we will have to change our computer’s Physical address and IP address. First of all, you have to go to Network and Sharing Center. Then click on Change Adapter Settings and right click on your adapter name and then click on Properties.
6. Now click on Configure and move to Advanced tab. Then look for Network Address in the list, and then you will find that it is set to Not Present. Now tick or check Value and type the MAC address you copied from Netcut. This will restart your adapter, so wait 10 seconds until it reconnects properly.
7. Now, it’s time to apply the IP we copied from Netcut. Now right click on your adapter name and click on Internet Protocol Version 4 (TCP/IPv4) and click on Properties. Now click on Use the following IP address.
   Fill the blanks like this:
   IP Address: Put the IP you got from Netcut.
   Subnet Mask: Use the same subnet mask you got from your ISP.
   Default Gateway: Use the same gateway IP you got from your ISP.
   To find the Subnet mask and Default gateway, you have to open up Command Prompt and type this command: IPCONFIG and you will find the subnet mask and gateway.

Congrats: You now have a free internet connection!
Note: If one client is not working, use another!

You can also visit my latest blog where I post weekly for the latest gaming and tech tips.

How does it Work?

For example, you are trying to access Google but when you press enter, instead of going to Google, it will redirect you to the ISP login page or ISP Website. So when you change your MAC and IP addresses, you change your identity and you get access to the internet.

This trick can also speed up your internet. If the client you choose is from a big company and uses an internet package which has a greater speed, you will get the same speed as they get.

I think, this post will help you with getting free internet.

If you are using a Router

Hey guys, I got a huge number of questions on how to apply this on routers because routers have become a common device which almost 90% of the Internet users use. Well, I tried this and succeeded. Let’s see how you can do this on your Router.

I have written a recent blog post on how to boost WiFi signal using a DIY WiFi extender. This usually helps boost your Internet speed significantly if you’re using a router.

I don’t know all the router’s interface but this option is known as MAC Clone. You can change your MAC address to the address you found on Netcut. Also change your router connection setting to Static IP if it’s set to DHCP. You have to set the IP as shown above. I hope that will help because it worked for me and I was enjoying the free internet with my family. 😀

SHARING is CARING! 😀

Please share if I could help you and let your friends know.
Don’t forget to comment below and if you face any problems, write them below and I will leave a reply and get something new for you! 😉

 

How to Host a COD4 Public Server for Free?

What’s up guys?

This post is for those who are interested in hosting a Call of Duty 4 Public Server for free. I play COD4 and I really like and hosting your own Public server is like a dream where you can kick any players and send messages to certain members and all these stuffs.

Required Stuffs:

1. A Computer (Windows XP/7/8)
2. Active Internet Connection (Minimum 2 Mbps speed)
3. A good PC with at least 4 Gigs of RAM and a good GPU for larger number of slots.
4. GameRanger Software for more players.
5. Modern Rcon for configuring your server.

Steps to get your Server Online:

1. Open a room in Game Ranger.
2. First start server with default settings and then leave game.
3. Now click on Make a Server and make Dedicated to Internet.
4. Now you will be that your game closes and a new window appears which is the console. Now you will see a text box right under it, type “rcon_password [YourDesiredPassword]” and press Enter.
5. Open Modern Rcon which you downloaded.
6. Type in your IPv4 IP Address in the IP Address box.
7. Type in the rcon password which you applied in the COD4 console.
8. Then simple click on Connect and you will be connected and given authority to the server. Now you can kick players, ban them, send messages and do all other stuffs.

 

Note: You can join your server by opening COD4 Multiplayer (iw3mp.exe) from your game directory and open up the console and type in /connect [YourIPv4Address]:28960 and you will be connect to your server.

I believe that this post helps you in hosting your own COD4 server. Enjoy your power in your own server! 😀

Share, like and comment!

Increasing Windows Speed without Upgrading RAM

Hi guys!

In this post, I m gonna share about a trick which can increase your Windows speed for free without upgrading your RAM. If you are facing issues with your PC, this is the best trick to fix your computer. It is really painful and horrible to have a PC which is slow and hangs  frequently. I happened to me and I know the consequence of it.

Once I had only 1 GB of RAM which was horrible but good enough for a personal PC which is used for smalls works like surfing the internet and doing some office work.

Required Software:

CCleaner: This is a software by Piriform which is free to use. It  removes junk files and unwanted softwares and registries which boost your PC speed. It also removes your browser cookies and histories for optimized browsing speed.

Cleaning your PC with CCleaner: [Recommended] 😉

1. Download CCleane which is 100% free.
2. Then install CCleaner and open it.
3. Click on Analyze and this will scan for junk files and errors which occupy huge space in your PC especially affects the RAM before these files are stored in the system Temp directory.
4. After the scan is finished, click on Run Cleaner to clean this junkies. 😀
5. Now we have to clean the unwanted registries which are using a good amount of space in the hard disk. So, click on Registry from the left column.
6. Now click on Scan for Issues and it will start scanning unwanted and damaged registries. After scanning has been completed, click on Fix Selected Issues.

Now you have deleted both the junkies and the unwanted issues or registries which used huge amount of space in your PC.

Cleaning your Windows without any Software: 🙂

1. First of all, you have to open Run by press Windows Button+R together.
2. Then type “tree” and press Enter. You will see that a CMD window opens and commands rain into it automatically. There is nothing to be scared off. It’s just a system refresh.
3. Now again open Run and type “temp” and press Enter. A new window will open where you will find several files and folders. Select all by pressing Ctrl+A together and press left Shift+Delete together to delete those files and folder permanently. Remember that all the files and folder won’t get deleted because those the system programs’ files and folders.
4. Now again open Run and type “prefetch” and press Enter like always. Again a new window appears like Temp folder. Select all the files and delete them permanently.
5. Now again open Run and type “tree” and it will system refresh your Windows.

This small trick will increase your Computer speed by 30% or more for free! If you liked this post, please share and comment if you fail to do anything. I am always there to reply and help you out! 😀

How to Hack Internet Speed by changing DNS Servers?

Hey guys!

Do you want to increase your internet speed without paying extra? Well, then this trick is the perfect one for you. This trick will increase your speed by 20% or more. It helps you get better speed at both Downloads and Uploads. It might not increase your upload speed but it will obviously increase the download speed.

How does it Work?

This trick works with the help of DNS. If you use a slower DNS server, you will find your speeds low. So it’s important to switch to a faster DNS Server. There are several DNS servers available but we need the ones which give high performance.

If we change our DNS settings, we might get better speeds. Now let’s see which DNS servers are better for our internet and which will help us get more speed. The best and most popular free DNS servers are Google DNS and OpenDNS and both are free and gives better speeds!

Google DNS servers:

• 8.8.8.8
• 8.8.4.4

OpenDNS servers:

• 208.67.222.222
• 208.67.220.220

Changing the DNS Servers:

1. Go to “Network and Sharing Center“.
2. Click on “Change Adapter Settings“.
3. Right click on your adapter and then “Properties“
4. Now click on the IPv4 Properties.
5. Now check “Use the following DNS server addresses“. Now type in the followings: (You can either use the Google DNS or OpenDNS servers)
   –Preferred DNS Server: 8.8.8.8  OR  208.67.222.222
   –Alternate DNS Server: 8.8.4.4  OR  208.67.220.220

 

Now click on “OK” and then again “OK“. Now your settings has been changed, I suggest to restart your adapter after changing these settings. Now enjoy the better speed without paying extra charges.